Radiation Tolerant – HiRel

Radiation Tolerant Components and SBC

DDC offers a wide range of radiation-hardened memory products, including EEPROM, SRAM, SDRAM, and NOR & NAND flash. Any of these products are available either with DDC’s proprietary RAD-PAK® shielding, or in rad-tolerant packages. Rad-tolerant devices are available in a hermetic ceramic package with a guaranteed TID tolerance at the die level. The EEPROM are also available in DDC’s proprietary Xray-PAK® shielding, a hermetic ceramic package shielding technology that eliminates any line-of-sight radiation penetration to the semiconductors inside the package.

MIL-STD-1553- SPACE Grade
  • Total Space RT: Complete Remote Terminal, with protocol, dual transceivers & transformers
  • Total-Space ACE: Complete Terminal with SRAM, protocol, dual transceivers & transformers
  • SPACE-PHY: Physical Layer interface, includes dual transceivers and transformers
    +3.3V or +5V Operation
  • Radiation Hardened from 100kRads to 1MRad
  • Latch-up Immune to 85.4 MeV-cm²/mg
  • Temperature Range: -55°C to +125°C
  • Technical Operating Report (TOR) Screening
https://www.kingslyonline.in/wp-content/uploads/2020/01/MIL-STD-1553-SPACE-Grade.png
Radiation Hardened Microelectronics
  • Memories: NAND Flash (to 256Gb), NOR Flash (to 512Mb), EEPROM, PROM, SRAM, and DDR2 SDRAM
  • Analog-to-Digital Converters
  • Digital-to-Analog Converters
  • Amplifiers and Comparators
  • Nuclear Event Detectors
  • Multiplexers & Logic
  • Optocouplers: Transistor, High Speed, High Gain, & High Gain Photon
  • Best-in-Class Radiation Hardening for Commercial Microelectronics
  • Low Power Dissipation
  • Radiation Mitigation Technologies
    • RAD-PAK® and XRAY-PAK®
    • Triple Mode Redundancy (TMR)
    • Error-Code Correction (ECC)
    • Latch-Up Protection ASIC
  • Radiation Tolerant (RT) solutions available for missions with lower TID requirement
https://www.kingslyonline.in/wp-content/uploads/2020/01/Radiation-Hardened-Microelectronics.png
In-line Space Grade Couplers

North Hills offers a full space-qualified line of In-Line MIL-STD-1553 data bus couplers. Full traceability of all materials and soldering to NASA 8739.3 or NHB5300.4 is provided. Our facilities are certified to ISO 9001:2000, MIL-Q-9858 and MIL-I-45208. Materials used in the data bus coupler and components meet the requirements for use in space and comply with NASA outgassing requirements in specification SP-R0022A. Coupler designs used on various harnesses have been qualified on many commercial and military rockets and satellites including, but not limited to: Atlas V Delta IV Int’l Space Station Messenger Satellite New Horizons Satellite Space Shuttle

https://www.kingslyonline.in/wp-content/uploads/2019/12/In-line-Space-Grade-Couplers.jpg
High-Speed, SWaP Optimized 3U SpaceVPX SBC

DDC’s space-proven Single Board Computer (SBC) product line now includes a compact, high performance (1700 DMIPS, 90 Linpack MFLOPS) SWaP optimized 3U SpaceVPX, offering many memory and I/O options, including: SpaceWire, UART, CANbus, I2C, SPI, GPIO, 1553, and Ethernet. Since the inception of our Space Microelectronics group, more than 20 years ago, our rad-hard Sp-COTSTM and SBC products have experienced zero failures in space.

https://www.kingslyonline.in/wp-content/uploads/2019/12/High-Speed-SWaP-Optimized-3U-SpaceVPX-SBC.jpg